Zappi V2.1 Electric Vehicle Charger

$1,595.00

2 reviews
Standard Installation Inclusion*

Standard installation includes up to a 15metre cable run, RCBO Type A Protection device in the existing distribution board, installation in preferred location, fully tested and certified as operational.

We can quote for additional work after your initial installation purchase.

Description

Future proof, intelligent electric car charging. Zappi is the #1 best selling solar compatible charger. Designed for convenience, not compromise.

Zappi is an adaptive EV charger that can take power from the grid, solar, or both. 

 The Zappi makes charging easy with a smart phone App tracking charging performance as well as enabling scheduled charging. 

Model Compatibility

Please note, any type 2 electric vehicle is compatible with this charger. The table before is for guidance. If you do not see your vehicle listed, please contact us.

Car Brand EV Model Compatible
AUDI E-tron 50 YES
AUDI E-tron 55 YES
AUDI E-tron Sportback 50 YES
AUDI E-tron Sportback 55 YES
AUDI E-tron S YES
AUDI E-tron S Sportback YES
AUDI E-Tron GT YES
AUDI RS e-tron GT YES
TESLA Model S YES
TESLA Model 3 Long Range YES
TESLA Model X YES
TESLA Model Y YES
TESLA Model 3 Plaid YES
TESLA Model 3 Performance YES
TESLA Model X Plaid YES
TESLA Model Y Long Range YES
TESLA Model 3 Standard Range Plus YES
HYUNDAI IONIQ 5 AWD YES
HYUNDAI IONIQ Electric YES
HYUNDAI Kona Electric Extended YES
HYUNDAI IONIQ GDI YES
HYUNDAI Kona Electric Standard YES
HYUNDAI IONIQ 5 2WD YES
NISSAN Leaf E+ YES
NISSAN Leaf YES
KIA EV6 YES
KIA Niro EV YES
KIA Niro PHEV YES
MERCESDES EQC YES
MERCESDES AMG EQS YES
MERCESDES EQA YES
LEXUS UX300e YES
MAZDA MX-30 Electric YES
MG ZS EV YES
BMW 330e YES
BMW i3 (2014 onwards) YES
BMW i4 eDrive40 YES
BMW iX3 YES
BMW 530e YES
BMW 745e YES
BMW X5 Drive45e YES
BMW I4 M50 YES
BMW IX M60 YES
BYD ATTO 3 Extended Range YES
BYD ATTO 3 Standard YES
POLESTAR Polestar 2 YES
RENAULT Kangoo Z.E YES
VOLVO XC40 Recharge Pure Electric YES
GWM ORA CAT Ultra YES
GWM ORA CAT Pro YES
GWM ORA CAT tech YES
MINI Electric Hatch YES
FORD Escape PHEV YES
FORD E-Transit Van YES
Zappi Features
  • 3 Charging Modes: ECO, ECO + & FAST
  • Inbuilt ethernet port
  • Built in WiFi/Hub Functionality (V2.1 only) (Separate Hub required for V2.0 for WiFi)
  • Optimises Microgeneration Self-Consumption
  • Works With Solar PV Or Wind Turbine Systems
  • Economy Tariff Sense Input
  • Programmable Timer Function
  • Charge & Event Logging
  • Pin-code Lock Function
  • OLEV (Home/Work Scheme) Approved - HUB required
  • Tap Operated Display Backlight
  • Built-in RCD Protection
  • Integral Cable Holster
  • Remote Control & Monitoring Add-on Option
  • Supplied With Clip-on Grid Current Sensor(s)
  • Works Alongside Battery Storage Systems
  • A Future Proof Installation
  • 3 Year Warranty
CT & Harvi Requirements**

Here are the CT & Harvi requirements for Zappi Installation to measure power supply, PV supply (Solar) and Battery.

Single Phase Zappi (7KW) comes with 1 x CT Clamp to measure the grid, but can wire up to 3 x CTs internally for PV or battery monitoring. A Harvi is required for additional CTs.

Three Phase Zappi (22KW) come with 3 x CT Clamps to measure the grid and can only wire up to 3 CTs internally. Harvi's are required for additional CTs.

If you have any questions please contact us.

 Single Phase Power with 7kW Zappi Hardware Guidelines

Solar Battery Harvi Additional CTs Required
No No 0 0
Yes No 0 1
Yes AC 0 2
Yes DC 0 1

Three Phase Power with 22kW Zappi Hardware Guidelines

Solar Battery Harvi Additional CTs Required
3 Phase No 1 3
3 Phase AC 2 4
3 Phase DC 1 3
1 Phase No 1 1
1 Phase AC 1 2
1 Phase DC 1 1
User & Installation Manual Datasheet

Three Electric Car Charging Modes

ECO

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will continue until the vehicle is fully charged, even if power is drawn from the grid.

ECO+

Charge power is continuously adjusted in response to changes in generation or power consumption elsewhere in the home. Charging will pause if there is too much imported power, continuing only when there is surplus free power available.

FAST

In this mode, the vehicle will be charged at maximum power. This is just like an ordinary Mode 3 charging point.

Smart EV Charger

Charge your EV with power from the grid, solar, or both

You don’t need solar panels or a wind power system to use the Zappi EV Charger. But purchasing it today, means you’re future fit for tomorrow.

Zappi is a smart EV charger with a difference. Zappi can operate as a standard home car charger, using power from the grid. It also has optional charging modes which use 100% green energy generated from your own home Solar PV system or wind generation.

Using your own power generation increases the Return On Investment (ROI) for your panels and electric car. And means that you can charge your EV at home for free! Zappi is easy to install and user friendly. But don’t worry, if you don’t have solar panels installed, the Zappi will still operate as a standard car charger harnessing power from the grid.

FAQs

What is the difference between untethered and tethered EV chargers?

A tethered charger comes with a charging cable physically attached to the charger.

An untethered charger does not come with a charging cable. You will need to purchase a separate charging cable if you purchase an untethered unit.

If I have a single phase grid connection, what power EV charger can I install?

For Single Phase, our recommendation is a 7kW Single Phase charger. The 22kW Chargers are three phase, you can install them and connect them on single phase, however, the maximum power will still only be 7kW.

If I have a three phase grid connection, what power EV charger can I install?

On a three phase grid connection you can install either a 7kW (Single Phase) or 22kW (Three Phase) charger. The benefits of the three phase charger is you can charge at a faster rate (not all cars can, so important to check how fast your car can charge on an AC connection).

What is the benefit of buying an untethered EV charger?

The main benefit of an untethered charger is that you can take the separate cable with you if you go on a road trip. For a tethered charger you cannot detach the cable from the physical unit.

Does Solar Matching work with my EV Charger even if I don't buy the extra CTs?

Yes, all features of the Zappi will still work. The additional CT Clamps are used to record the data and show the solar generation within the Myenergi App. If you do not purchase the additional CT clamps then the solar generation statistics will not display in the Myenergi App.

Zappi EV Charger Smart Phone Application

Once you receive your Zappi EV Charger you can download the Myenergi App. This enables you to schedule charging, view your charging statistics, change charging modes and view your entire eco-system of connected devices.

If you want to see your solar generation or battery storage within the Myenergi App (see picture) then you will require additional CT Clamps and potentially a Harvi Unit. See CT & Harvi Requirements if this is of interest to you.

The main benefit of connecting all of your devices is so you can see exactly how much energy you are using and then order the priority of energy supply within the app. i.e. if you want your battery to be filled before your EV starts charging, then you can set this up within the app. See the below example images from the Myenergi App.

Zappi EV Charger with High Solar Generation

Zappi EV Charger with Low Solar Generation

Zappi EV Charger with No Solar Generation

Enquiry

Zappi V2.1 Electric Vehicle Charger

Find out more information, or how to get started today, by filling in the form below. One of our friendly staff will contact you to answer any questions you have about your EV charging needs.

×